---
title: 3D Navigation
description: Learn the many ways you can navigate around your model.
---

[Skip to content](https://content.twinview.com/knowledge-base/user-interface-and-navigation/3d-navigation#main-content)

English

Show submenu for translations

[![Twinview Academy - Purple Background (3).png\]](https://content.twinview.com/hs-fs/hubfs/Twinview%20Academy%20-%20Purple%20Background%20(3).png?height=50&name=Twinview%20Academy%20-%20Purple%20Background%20(3).png)](https://content.twinview.com/knowledge-base?hsLang=en)

Open main navigation

Close main navigation

- English
  
  Show submenu for translations
- [Go to twinview.com](https://www.twinview.com/)

[Go to twinview.com](https://www.twinview.com/)

 Welcome To The Twinview Knowledge Base

- There are no suggestions because the search field is empty.

1. [User Interface & Navigation](https://content.twinview.com/knowledge-base/user-interface-navigation?hsLang=en)

# 3D Navigation

## Learn the many ways you can navigate around your model.

### Exploring Your Building in 3D

Twinview's interactive 3D viewer allows you to explore your building, locate equipment and interact with objects within the building model.

Whether you're navigating between floors, inspecting plant equipment or finding a particular room, Twinview provides several ways to move around your model.

This guide explains the two main navigation modes, **Orbit** and **First Person**, alongside useful controls for moving, zooming and returning to saved viewpoints.

**By the end of this guide, you'll know how to:**

- Rotate, pan and zoom around your building model.
- Focus on individual objects and equipment.
- Explore the building using First Person navigation.
- Return to your default or saved viewpoints.
- Adjust navigation settings to suit your preferences.

*Note: These controls apply to projects containing a 3D building model. The precise appearance of the viewer may vary depending on your project configuration.*

### 1. Orbital Navigation<https://content.twinview.com/knowledge-base/user-interface-and-navigation/3d-navigation#orbital-navigation>

Orbital Navigation is the default navigation mode in Twinview.

It allows you to rotate around your building, zoom into particular areas and move your viewpoint to explore the model from different perspectives.

This is particularly useful when examining the building externally, navigating between floors or inspecting equipment.

<iframe height="387" src="https://cdn.iframe.ly/n2Hv3ZO" style="margin: 10px auto; display: block; clear: both;" width="688" allowfullscreen></iframe>

 

**Rotating the Model (Orbit)**

To rotate your view:

1. Position your cursor over the 3D model.
2. Press and hold the **left mouse button**.
3. Move your mouse to rotate your viewpoint around the model.
4. Release the mouse button when you've reached your preferred angle.

By default, Twinview rotates around the centre of the project.

You can change this rotation centre by double-clicking a particular object, allowing you to explore it more closely.

**Tip:** If you're trying to inspect a specific piece of equipment, double-click it first. This will establish a more useful rotation point when exploring the surrounding area.

 

**Zooming In & Out**

To zoom:

1. Position your cursor over the 3D model.
2. Scroll your **mouse wheel forwards** to zoom in.
3. Scroll backwards to zoom out.

You can also double-click an object to establish a new zoom centre, making it easier to move towards a particular part of the building.

This is particularly helpful when navigating large or complex models.

 

**Panning Your View**

Panning moves your viewpoint horizontally or vertically without rotating the model.

To pan:

1. Position your cursor over the model.
2. Press and hold the **right mouse button**.
3. Move your mouse in the direction you want to shift your view.
4. Release the mouse button when you're finished.

Panning is useful when you want to inspect a different part of a floor or room while maintaining your current viewing angle.

You can also activate the **Pan** tool from the View Toolbar, which is useful when using a laptop or trackpad.

**Quick Reference: Orbital Navigation**

| Action | Mouse Control |
| --- | --- |
| Rotate (Orbit) | Hold left mouse button and drag |
| Zoom in | Scroll mouse wheel forwards |
| Zoom out | Scroll mouse wheel backwards |
| Pan | Hold right mouse button and drag |
| Change rotation or zoom centre | Double-click an object |
| Select a model object | Single-click the object |

### 2. Orbit vs Free Orbit

Twinview provides two orbital navigation options: **Orbit** and **Free Orbit**.

You can switch between these using the Orbit Constraints control in the View Toolbar.

**Orbit**

This is the recommended mode for most day-to-day building navigation.

Orbit applies constraints to camera rotation, helping maintain a consistent orientation while moving around the building.

It is generally the easiest mode for exploring architectural and building services models.

**Free Orbit**

Free Orbit provides greater flexibility when rotating the camera.

This can be useful when inspecting equipment from unusual angles or exploring complex areas where standard orbital navigation feels restrictive.

However, it can also make it easier to lose your sense of orientation.

**Tip:** For most users, we recommend leaving the viewer in standard Orbit mode and switching to Free Orbit only when additional camera flexibility is required.

### 3. First Person Navigation

First Person mode allows you to explore the building from a viewpoint similar to walking through it.

Instead of rotating around the outside of the model, you can move through rooms, corridors and other modelled spaces.

This can be particularly useful when:

- Exploring the internal layout of a building.
- Navigating through corridors and rooms.
- Understanding the location of equipment within a space.
- Reviewing access routes to plant rooms or building services.

**Activating First Person Mode**

![LMBoQiDCLi](https://content.twinview.com/hs-fs/hubfs/LMBoQiDCLi.png?width=670&height=86&name=LMBoQiDCLi.png)

To begin:

1. Navigate to a suitable location within your 3D model.
2. Select **First Person** from the View Toolbar.
3. Move your mouse to look around.
4. Use the keyboard controls below to move through the model.

 

 

We recommend starting from a suitable internal viewpoint, ideally within the building or close to the space you want to explore.

 

**First Person Keyboard Controls**

| Key | Action |
| --- | --- |
| **W** | Move forwards |
| **S** | Move backwards |
| **A** | Move left |
| **D** | Move right |
| **Q** | Move vertically down |
| **E** | Move vertically up |
| **Shift + movement key** | Move faster (Run mode) |

While in First Person mode, moving your mouse changes the direction you're looking.

You can combine mouse movement with keyboard controls to navigate through the building.

For example, holding **W** while moving your mouse allows you to move forwards and change direction.

**Moving Between Floors**

Unlike walking around a physical building, First Person mode also allows you to move vertically through the model.

Use:

- **E** to move upwards.
- **Q** to move downwards.

These controls can help you navigate between building levels or reach areas that would otherwise be difficult to access.

**Teleporting to a Location**

Twinview also provides a teleport feature within First Person mode.

To teleport:

1. Position your cursor over a modelled object, plane or surface.
2. Double-click the desired location.
3. Your viewpoint will move to that location.

This can be useful for moving quickly through a large model without manually navigating the entire distance.

The result will depend on the geometry available within the model.

**Exiting First Person Mode**

To return to standard navigation, select the **First Person** control in the View Toolbar again.

This switches the viewer back to orbital navigation.

<iframe height="371" src="https://cdn.iframe.ly/RDy7MGK" style="margin: 10px auto; display: block; clear: both;" width="660" allowfullscreen></iframe>

 

### 6. Adjusting Your Navigation Settings

Twinview allows you to adjust certain viewer settings to suit your preferences.To access these options, open **3D View Settings** from the View Toolbar.

 

Available settings include options relating to navigation behaviour, mouse zoom speed and direction, visual appearance and other viewing preferences.

 

For example, if you find that zooming feels too fast or moves in the opposite direction to what you're used to, you can adjust the relevant viewer settings.

 

**Saving Your Preferences**

Viewer settings are stored locally in your browser and can persist between Twinview projects when using the same browser.

These settings affect your personal viewing experience rather than changing the underlying building model.

If you want to restore the original configuration, select **Restore all default settings** within the Viewer Settings window.

*Note: Locally stored preferences may need to be configured again if you clear your browser data or switch to another browser or device.*

### 7. Troubleshooting Navigation Issues

 

If you're having difficulty moving around your model, the following guidance may help.

| Issue | Suggested Solution |
| --- | --- |
| **The model rotates around the wrong point.** | Double-click the object you want to focus on to establish a new rotation centre. |
| **I've lost sight of the building.** | Use Reset or the Home button to return to the default view. |
| **The model is rotating unpredictably.** | Check whether Free Orbit is enabled and switch back to standard Orbit mode. |
| **Zooming feels too fast or too slow.** | Adjust the zoom settings within 3D View Settings. |
| **I can't easily pan using my trackpad.** | Use the Pan tool in the View Toolbar. |
| **I can't move around using the keyboard.** | Check that First Person mode is enabled and that you're interacting with the 3D viewer. |
| **First Person navigation starts from an unsuitable position.** | Return to Orbital Navigation, move to a better starting viewpoint and reactivate First Person mode. |
| **The model is slow or unresponsive.** | Allow the model to finish loading, check your connection and consider whether model complexity or device performance may be affecting the viewer. |

If a problem persists, contact your Twinview project administrator or designated support contact.

### Where to Go Next

Now that you're comfortable navigating your building model, you can explore more advanced viewing tools:

- [**Creating a Section**](https://content.twinview.com/knowledge-base/user-interface-and-navigation/creating-a-section?hsLang=en) — Learn how to create temporary cuts through the building to inspect internal areas.
- [**Dimensioning in Twinview**](https://content.twinview.com/knowledge-base/user-interface-and-navigation/dimensioning-in-twinview?hsLang=en) — Learn how to measure distances and dimensions within the model.
- [**The Views Tab**](https://content.twinview.com/knowledge-base/user-interface-and-navigation/the-views-tab?hsLang=en) — Create and manage saved viewpoints.
- [**The Models Tab**](https://content.twinview.com/knowledge-base/user-interface-and-navigation/the-models-tab?hsLang=en) — Understand how to view and manage the models associated with your project.
- [**Model Filter**](https://content.twinview.com/knowledge-base/user-interface-and-navigation/model-filter?hsLang=en) — Learn how to locate, filter and highlight objects within your model.

- [Getting started](https://content.twinview.com/knowledge-base/getting-started?hsLang=en)
- [User Interface & Navigation](https://content.twinview.com/knowledge-base/user-interface-navigation?hsLang=en)
- [Asset & Information Management](https://content.twinview.com/knowledge-base/asset-information-management?hsLang=en)
- [Facilities Management Toolkit](https://content.twinview.com/knowledge-base/facilities-management-toolkit?hsLang=en)
- [IoT & Analytics Module](https://content.twinview.com/knowledge-base/iot-analytics-module?hsLang=en)
- [IoT Setup & Integrations](https://content.twinview.com/knowledge-base/iot-setup-integrations?hsLang=en)
- [Node Assistant](https://content.twinview.com/knowledge-base/node-assistant?hsLang=en)
- [Training Excercises](https://content.twinview.com/knowledge-base/training-excercises?hsLang=en)
- [Appendix Documents](https://content.twinview.com/knowledge-base/appendix-documents?hsLang=en)

[![Twinview\_BLACK\_RGB](https://content.twinview.com/hs-fs/hubfs/Twinview_BLACK_RGB.png?width=200&height=78&name=Twinview_BLACK_RGB.png "Twinview_BLACK_RGB")](https://content.twinview.com/knowledge-base?hsLang=en)

Copyright © 2026, Twinview